Loading...

Processing your request

Thank you for your patience.

Wildfire Mitigation and Preparedness

Safety is Our Goal

When wildfires threaten the communities we serve, we act quickly to protect lives, property and critical infrastructure. Effective wildfire preparedness requires year-round coordination with emergency management officials, local leaders and our customers.


Readiness

Our proactive work to safeguard our communities and mitigate wildfire risk includes:

Vegetation Management

We have increased the frequency and scope of right-of-way inspections and trimming of trees and vegetation near power lines to reduce ignition risks.

Enhanced Monitoring

We have deployed advanced technology to detect emerging risks and help us take preventive action.

System Hardening

We are upgrading poles, wires and other grid components to withstand extreme conditions and minimize potential fire hazards.

Collective Planning

By coordinating closely with local emergency management agencies and first responders, we ensure safe, rapid response plans.

Responsiveness

During an active wildfire, we may need to de-energize affected circuits to reduce the risk of injury or loss of life. We take this step only when urgently requested by civil authorities or first responders, or when fire damage causes the electric system to operate unsafely.

Fire Risk Protocols

As a first step, our field employees take extra care to identify potential hazards, work safely and avoid creating sparks. Precautions include turning off idle vehicles and limiting the use of hot tools such as chainsaws or welding torches.

Conservative Operations

During conservative operations, we disable automatic reclosing – the feature that would usually restore power after a brief interruption – to reduce the potential for new sparks. Most customers won’t notice when conservative operations are enabled. However, if an outage occurs, it might take a bit longer to turn power back on while we make certain conditions are safe.

Emergency De-Energization

During an active fire, we may need to disable affected circuits to mitigate the risk of injury or death. These outages occur either at the urgent request of first responders or when fire damage causes the system to operate in an unsafe condition.

Public Safety Power Shutoff (PSPS)

PSPS involves proactively disabling power to a targeted area prior to an ignition event, when forecasted conditions indicate a high probability of a wildfire, and we must act to protect lives.

We consider weather like wind and humidity, and climate conditions like drier vegetation when considering a PSPS. It is the final option after considering all others when the public safety is at risk.

Frequently Asked Questions

There are many things you can do to help your family stay safe. First, create a defensible space around your home, clear of dead vegetation or trash. Prepare an emergency kit that you can grab and take with you in case you need to evacuate. Talk with your family to develop a family plan, including where you will meet up if you are separated. Finally, sign up for outage alerts at AEPTexas.com/alerts so you can receive updates in case a wildfire affects your electric service.
Dry weather, strong winds, types and conditions of local vegetation and numerous other factors can influence how likely it is a wildfire could ignite or spread.
Conservative operations help us keep power on while reducing the risk that electrical equipment could create sparks. We do so by disabling our system’s ability to automatically turn power back on after a brief disruption. If an outage occurs while an area is under conservative operations, a thorough safety assessment is necessary before we restore power.
Emergency de-energization occurs during an active wildfire that creates unsafe conditions for normal operations. During emergency de-energization, power is shut off to protect first responders and the public.
A Public Safety Power Shutoff (PSPS) is a planned, proactive de-energization prior to an ignition event. Our goal is always to keep the power flowing, but our obligation is to operate our system safely. During extreme fire weather conditions, we may need to turn off power to a targeted high-risk area lessen the chance our equipment could start a deadly fire. This is a tool of last resort. In addition, outages during severe conditions may result from other causes such as weather impacts, vehicle incidents, acute fire damage or emergency response activities, and are not necessarily the result of a PSPS event.

Local water systems may be affected by power outages, including potential impacts to electrically powered pumps used for water supply and firefighting.

Cell phone and internet services may go down during extended power outages due to backup power constraints at telecommunications facilities.

AEP Texas coordinates with local utilities and emergency management partners, including fire departments, to support awareness of system dependencies and preparedness measures in advance of high-risk conditions.

We never want to turn off the power. Sometimes it is necessary to protect lives, property and critical infrastructure. We do not turn off power to specific customers. Instead, we de-energize equipment where normal operations would be unsafe. The number of residents and businesses affected, the size of the de-energized area and the duration of the outage will depend on the severity of the fire threat, local conditions and the layout of the electrical grid. We will always attempt to safely isolate the smallest area possible to minimize the disruption of electricity service to our customers.
Throughout the year, you can find helpful resources at AEPTexas.com and on our social media pages. Follow us on Facebook and X.

Notifying affected customers before implementing emergency wildfire-related operational changes may not always be possible, but as new information becomes available during a service disruption, updates will appear on our outage map.

At least 48 hours before a PSPS event, we will post information about the forecasted fire potential, prudent actions, potential scope and anticipating timing at AEPTexas.com, and on Facebook and X. We will continue to update these channels as confidence increases or information changes.

In the 1-3 days before a PSPS event, we will attempt to directly notify all customers likely to be affected by the event via email, phone or text message, with special focus on contacting Critical Load Customers and medically sensitive Critical Care Customers on file.

During service interruptions for any reason, outage alerts can help you stay informed and up to date. Sign up for alerts here. Also, during an outage, please check AEPTexas.com for updates and restoration estimates.

If loss of power could result in serious impairment or life-threatening circumstances for a member of your household, please ensure an active Critical Care Form is on file.
Emergency de-energizations and PSPS events will last until it is safe to restore power. We will work closely with local first responders and emergency management teams to safely coordinate necessary assessments and repairs, then re-energize only when conditions are safe. During outages, look for updates at AEPTexas.com.
Our vegetation management practices, grid hardening, public education efforts and collaborative planning with emergency management teams each play a role in reducing the potential for wildfires.
We are not typically liable for personal or business losses caused by service interruptions. If you wish to file an individual claim, please visit aepclaims.com to provide documentation. If you wish to file a business claim, please call (800) 277-2177.
We work closely with water purveyors, 911 dispatch centers, hospitals, schools and other critical facilities before and during wildfires to ensure coordinated plans are in place. If you manage a critical load facility, please send a completed Critical Load Application Form to CriticalLoadAEPTX@aep.com.

Get Real-time Outage Alerts

Enroll to receive real-time outage notifications and updates. Make sure we have your current cell phone number and email address.

Manage alerts

Stay Connected

In an emergency, minutes matter. Before a wildfire approaches, make sure you have more than one way to receive updated information.

Check Social Media

Follow us on Facebook and X. Also consider following local media, fire departments, emergency services and elected officials.

Enable Wireless Emergency Alerts

These are free, location-based notifications from federal, state, local, tribal and territorial authorities warning of imminent threats, such as severe weather, wildfires and AMBER Alerts. Enable WEAs on your mobile device under notification settings.

Welcome back!

Please login to manage your account.